Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Professional hoa & apartment pressure washing for brick in Silverthorne, CO brings it back, usually in a single visit. On brick, the method we use is low-pressure wash.
The right method for the job
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Caring for brick
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Signs you need hoa & apartment pressure washing for brick
- Mildew on building walls
- Dirty breezeways and stairs
- Stained sidewalks and curbs
- Residents' complaints or HOA violation notices
Where the grime comes from
- Heavy foot traffic
- Shade and humidity
- Shared trash and parking areas
Easy upkeep between cleanings
- Plan cleaning before inspections or paint cycles
- Notify residents ahead of time
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Water into units through windows and doors
- Damaged landscaping
- Residents' cars and belongings in the spray area
What happens on the day
- Walk the property with the manager
- Plan a schedule and notify residents
- Wash buildings and breezeways
- Clean flatwork and amenity areas
- Inspect and report
HOA & Apartment Pressure Washing for Brick cost in Silverthorne, CO
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
Serving Silverthorne, CO and nearby towns
Commercial properties in Colorado usually schedule a spring clean-up of sand, salt and litter, and summer cleaning of entrances, patios and drive-thrus.
Some cities in Colorado limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Silverthorne (ZIP codes 80497 and 80498), we handle hoa & apartment pressure washing for brick in Frisco (4.2 mi), Breckenridge (10.6 mi), Vail (16 mi) and Avon (23.8 mi). Call (877) 658-5887 for a free quote in Silverthorne.
HOA & Apartment Pressure Washing for Brick: frequently asked questions
How much does hoa & apartment pressure washing for brick cost in Silverthorne, CO?
HOA & Apartment Pressure Washing for Brick typically costs $800-$5,000 depending on the number of buildings, and usually takes One day to several weeks. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.
Do you use high pressure for hoa & apartment pressure washing for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is hoa & apartment pressure washing for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule hoa & apartment pressure washing for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.